Description
F-tone Networks’s FTQ5-2H-DR4xx 200GE QSFP56 Optical Transceiver modules are designed for using in 200 Gigabit Ethernet links over single-mode fiber. They are compliant with the QSFP MSA and with IEEE 802.3bs 200GBASE-DR4 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. The transceiver is RoHS 2.0 compliant and lead-free per Directive 2011/65/EU.
Features
● Hot-pluggable QSFP56 form factor
● Built-in 200G PAM4 DSP
● Supports 212.5Gb/s aggregate bit rates
● Low power dissipation < 5.5W
● RoHS 2.0 compliant (lead-free)
● Single 3.3V power supply
● Maximum link length of 500m ~ 2km over SMF
● Uncooled 4 channels 1310nm EML
● 4 channels PIN photo detector array
● 200GAUI-4 electrical interface
● Single MPO12 receptacle with 8° APC
● CMIS V4.0 compliant
● Built-in digital diagnostic functionality
● Case operating temperature
Commercial: 0 ~ +70℃
Industrial: -40 ~ +85℃
Applications
● IEEE 802.3bs 200GBASE-DR4 Ethernet (PAM4)
Absolute Maximum Ratings
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
Supply Voltage |
Vcc |
-0.3 |
3.6 |
V |
|
Input Voltage |
Vin |
-0.3 |
Vcc+0.3 |
V |
|
Storage Temperature |
Ts |
-20 |
85 |
ºC |
|
Case Operating Temperature |
Tc |
0 |
70 |
ºC |
|
Humidity (non-condensing) |
Rh |
5 |
85 |
% |
Recommended Operating Conditions
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Supply Voltage |
Vcc |
3.13 |
3.3 |
3.47 |
V |
|
Operating Case Temperature |
Tc |
0 |
70 |
ºC |
|
|
Baud Rate per Lane (PAM4) |
fd |
26.5625 |
GBaud/s |
||
|
Power Dissipation |
Pm |
5.5 |
W |
||
|
Fiber Bend Radius |
Rb |
3 |
cm |
Electrical Specifications
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Differential Input Impedance |
Zin |
90 |
100 |
110 |
ohm |
|
Differential Output Impedance |
Zout |
90 |
100 |
110 |
ohm |
|
Differential Input Voltage Amplitude |
ΔVin |
300 |
900 |
mVpp |
|
|
Differential Output Voltage Amplitude |
ΔVout |
300 |
900 |
mVpp |
|
|
Bit Error Rate Note2 |
BER |
2.4E-4 |
|||
|
Input Logic Level High |
VIH |
2.0 |
Vcc |
V |
|
|
Input Logic Level Low |
VIL |
0 |
0.8 |
V |
|
|
Output Logic Level High |
VOH |
Vcc-0.5 |
Vcc |
V |
|
|
Output Logic Level Low |
VOL |
0 |
0.4 |
V |
Note:
Note2. Compliant with 200GBASE-DR4 electrical specification in IEEE802.3bs standard.
Optical Characteristics
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
|
Transmitter |
||||||
|
Center Wavelength |
λc |
1304.5 |
1317.5 |
nm |
||
|
Side-mode suppression ratio |
SMSR |
30 |
nm |
|||
|
Average Launch Power (each lane) |
Pout |
-5.1 |
4 |
dBm |
||
|
Launch power in OMAouter minus TDECQ |
Ptdecq |
-4.4 |
dBm |
|||
|
Transmitter and dispersion eye closure (each lane) |
TDECQ |
3.4 |
dB |
|||
|
Average launch power of off transmitter(each lane) |
Poff |
-30 |
dBm |
|||
|
Outer Extinction Ratio |
ER |
3.5 |
dB |
|||
|
Optical Return Loss Tolerance |
ORLT |
21.4 |
dB |
|||
|
Receiver |
||||||
|
Center Wavelength |
λc |
1304.5 |
1317.5 |
nm |
||
|
Damage threshold |
Rdam |
4 |
dBm |
|||
|
Average Receive Power (each lane) Input (each lane) |
Pin |
-8.1 |
3 |
dBm |
||
|
Receiver Power (OMAouter) (each lane) Note3 |
OMAout |
2.8 |
dBm |
|||
|
Stressed Receiver Sensitivity (OMAouter) (each lane) |
Sens |
-4.1 |
dBm |
|||
|
Receiver Sensitivity (OMAouter) (each lane) Note4 |
Sen |
-6.6 |
dB |
|||
Note:
Note3. Measured with conformance test signal at TP3 for the BER specified in section 138.1.1 of IEEE 802.3cd.
Note4. Measured with conformance test signal at TP3 for the BER specified in section 138.1.1 of IEEE 802.3cd.
Mechanical Dimensions
Ordering Information
|
Part Number |
Product Description |
|
FTQ5-2H-DR4 |
QSFP56, 200GBASE-DR4 Transceiver, 500m over SMF, DSP version,0ºC ~ +70ºC |
|
FTQ5-2H-DR4I |
QSFP56, 200GBASE-DR4 Transceiver, 500m over SMF, DSP version,-40ºC ~ +85ºC |
北亿纤通 | F-tone Networks
企业邮箱： 该邮件地址已受到反垃圾邮件插件保护。要显示它需要在浏览器中启用 JavaScript。
企业手机：19081343401
企业电话：028-85255257
企业传真：028-85977702
注：本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.