Description
F-tone Networks QSFP to 4x SFP+ breakout Active Optical Cable offers IT professionals a cost-effective interconnect solution for merging 40G QSFP and 10G SFP+ enabled host adapters, switches and servers.
For typical applications, users can install this splitter Active Optical cable between an available QSFP port on their 40Gbps rated switch and feed up to four upstream 10GbE-SFP+ enabled switches. Each QSFP-SFP+ splitter Active Optical cable features a single QSFP connector (SFF-8436) rated for 40Gbps on one end and (4) SFP+ connectors (SFF-8431), each rated for 10-Gb/s, on the other.
Features
● Electrical interface compliant to QSFP+ connector (SFF-8436) and SFP+ connectors (SFF-8431)
● Hot Pluggable
● 850nm VCSEL transmitter, PIN photo-detector receiver
● Up to 100m on OM3 MMF
● All-metal housing for superior EMI performance
● RoHS compliant (lead free)
● Case operating temperature
Commercial: 0 ~ +70℃
Industrial: -40 ~ +85℃
Applications
● 40 Gigabit Ethernet
● Fibre Channel Applications
● InfiniBand QDR, SDR, DDR
● High-performance computing clusters
● Servers, switches, storage and host card adapters
QSFP interface Specifications
|
Parameter |
Description |
|
Module Form Factor |
QSFP+ (Supports SFF8436/SFF8472) |
|
Channel Data Rate |
Rate 40Gbps |
|
BER |
<10-12 |
|
Operating Case Temperature |
0 to + 70ºC |
|
Storage Temperature |
-20 to + 85ºC |
|
Supply Voltage |
3.3V |
|
Maximum supply current |
180mA per end typical |
|
Management Interface Serial |
I2C (Supports SFF8472) |
Optical Characteristics
The following optical characteristics are defined over the Recommended Operating Environment unless otherwise specified.
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
|
|
Transmitter |
|||||||
|
Centre Wavelength |
λc |
840 |
850 |
860 |
nm |
- |
|
|
RMS spectral width |
∆λ |
- |
- |
0.65 |
nm |
- |
|
|
Average launch power, each lane |
Pout |
-7.6 |
- |
2.4 |
dBm |
- |
|
|
Difference in launch power between any two lanes (OMA) |
4 |
dB |
- |
||||
|
Extinction Ratio |
ER |
3 |
- |
- |
dB |
- |
|
|
Peak power, each lane |
4 |
dBm |
- |
||||
|
Transmitter and dispersion penalty (TDP), each lane |
TDP |
3.5 |
dB |
- |
|||
|
Average launch power of OFF transmitter, each lane |
-30 |
dBm |
- |
||||
|
Eye Mask coordinates: X1, X2, X3, Y1, Y2, Y3 |
SPECIFICATION VALUES 0.23, 0.34, 0.43, 0.27, 0.35, 0.4 |
Hit Ratio = 5x10-5 |
|||||
|
Receiver |
|||||||
|
Centre Wavelength |
λc |
840 |
850 |
860 |
nm |
- |
|
|
Stressed receiver sensitivity in OMA,each lane |
-5.4 |
dBm |
1 |
||||
|
Maximum Average power at receiver input, each lane |
2.4 |
dBm |
- |
||||
|
Receiver Reflectance |
-12 |
dB |
- |
||||
|
Peak power, each lane |
4 |
dBm |
- |
||||
|
LOS Assert |
-30 |
dBm |
- |
||||
|
LOS De-Assert – OMA |
-7.5 |
dBm |
- |
||||
|
LOS Hysteresis |
0.5 |
dB |
- |
||||
Note：1．Measured with conformance test signal at TP3 for BER = 10e-12
SFP+ interface Specifications
|
Parameter |
Description |
|
Module Form Factor |
SFP+ (Supports SFF8431/SFF8432/SFF8472) |
|
Channel Data Rate |
Rate 1 to 10.3125Gbps |
|
BER |
<10-12 |
|
Operating Case Temperature |
0 to + 70ºC |
|
Storage Temperature |
-20 to + 85ºC |
|
Supply Voltage |
3.3V |
|
Supply current |
455mA maximum |
|
Management Interface Serial |
I2C (Supports SFF8472) |
Optical characteristics
The following optical characteristics are defined over the Recommended Operating Environment unless otherwise specified.
|
Parameter |
Symbol |
Min. |
Typical |
Max |
Unit |
Notes |
|
Transmitter |
||||||
|
Center Wavelength |
λt |
840 |
850 |
860 |
nm |
|
|
RMS spectral width |
Pm |
- |
- |
Note 1 |
nm |
|
|
Average Optical Power |
Pavg |
-6.5 |
- |
-1 |
dBm |
2 |
|
Extinction Ratio |
ER |
3.5 |
- |
- |
dB |
3 |
|
Transmitter Dispersion Penalty |
TDP |
- |
- |
3.9 |
dB |
|
|
Relative Intensity Noise |
Rin |
- |
- |
-128 |
dB/Hz |
12dB reflection |
|
Optical Return Loss Tolerance |
- |
- |
12 |
dB |
||
|
Receiver |
||||||
|
Center Wavelength |
λr |
840 |
850 |
860 |
nm |
|
|
Receiver Sensitivity |
Psens |
- |
- |
-11.1 |
dBm |
4 |
|
Stressed Sensitivity in OMA |
- |
- |
-7.5 |
dBm |
4 |
|
|
Los function |
Los |
-30 |
- |
-12 |
dBm |
|
|
Overload |
Pin |
- |
- |
-1.0 |
dBm |
4 |
|
Receiver Reflectance |
- |
- |
-12 |
dB |
||
Note:
1. Trade-offs are available between spectral width, center wavelength and minimum OMA, as shown in table 6.
2. The optical power is launched into MMF
3. Measured with a PRBS 231-1 test pattern @10.3125Gbps
4.Measured with a PRBS 231-1 test pattern @10.3125Gbps,BER≤10-12.
Mechanical Dimensions
Ordering information
|
Part Number |
Product Description |
|
FTCQ-4X-4CS-Oxxx |
40G QSFP to 4x 10G SFP+ Active Optical Cable,0ºC ~ +70ºC |
|
FTCQ-4X-4CS-OxxxI |
40G QSFP to 4x 10G SFP+ Active Optical Cable,-40ºC ~ +85ºC |
|
xxx :001~100,1~100 Length in meters. (OM3 fiber is available) |
|
|
Further details are available from any F-tone Networks sales representative. |
|
北亿纤通 | F-tone Networks
企业邮箱：该邮件地址已受到反垃圾邮件插件保护。要显示它需要在浏览器中启用 JavaScript。
企业手机：19081343401
企业电话：028-85255257
企业传真：028-85977702
注：本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.