Description
The F-tone Networks 100G LR1-20km QSFP28 optical transceiver, 100G QSFP28 LR1-20(FTQ2-HG-LR1xx) is designed for using in 100-Gigabit Ethernet links up to 20km over Single-Mode Fiber (SMF). It is compliant with the QSFP28 MSA ,100G Lambda 100G LR1-20 and CAUI-4(no FEC)1. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA.
The module incorporates 1 channel optical signal, on 1311nm center wavelength, operating at 100Gbps data rate. This module can convert 4 channels of 25Gbps (NRZ) electrical input data to 1 channel of 100Gbps (PAM4) optical signal, and also can convert 1 channel of 100Gbps (PAM4) optical signal to 4 channels of 25Gbps (NRZ) electrical output data. The electrical interface uses a 38-contact edge type connector. The optical interface uses a Duplex LC connector. The high performance cooled EML transmitter and high sensitivity PIN receiver provide superior performance for 100Gigabit Ethernet applications up to 20km links.
Features
● Compliant to 100G Lambda MSA 100G LR1-20
● Full-duplex transceiver module
● 4x25.78125Gbps NRZ electrical interface(CAUI-4)
● 106.25Gbps PAM4 based on a cooled EML TOSA transmitter
● 106.25Gbps PAM4 PIN Receiver
● 4W maximum power dissipation
● Hot-pluggable QSFP28 form factor
● Maximum link length of 20km on G.652 SMF with KP-FEC
● Duplex LC receptacles
● Built-in digital diagnostic functions
● Single 3.3V power supply
● RoHS compliant (lead free)
● Case operating temperature
Commercial: 0 ~ +70℃
Industrial: -40 ~ +85℃
Applications
● 100G Lambda 100G LR1-20
Absolute Maximum Ratings
Parameter |
Symbol |
Min |
Max |
Unit |
Supply Voltage |
Vcc |
-0.3 |
3.6 |
V |
Input Voltage |
Vin |
-0.3 |
Vcc+0.3 |
V |
Storage Temperature |
Ts |
-20 |
85 |
ºC |
Case Operating Temperature |
Tc |
0 |
70 |
ºC |
Humidity (non-condensing) |
Rh |
5 |
85 |
% |
Recommended Operating Conditions
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Supply Voltage |
Vcc |
3.13 |
3.3 |
3.47 |
V |
Operating Case temperature |
Tc |
0 |
- |
70 |
ºC |
Data Rate Per Lane |
fd |
- |
106.25 |
- |
Gb/s |
Humidity |
Rh |
5 |
- |
85 |
% |
Power Dissipation |
Pm |
- |
- |
4 |
W |
Link Distance with G.652 |
D |
- |
- |
20 |
km |
Electrical Specifications
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Differential Input Impedance |
Zin |
90 |
100 |
110 |
ohm |
Differential Output Impedance |
Zout |
90 |
100 |
110 |
ohm |
Differential Input Voltage Amplitude1 |
ΔVin |
- |
- |
1600 |
mVp-p |
Differential Output Voltage Amplitude2 |
ΔVout |
- |
- |
900 |
mVp-p |
Note:
- Differential input voltage amplitude is measured between TxnP and TxnN.
- Differential output voltage amplitude is measured between RxnP and RxnN.
Optical Characteristics
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
Transmitter |
||||||
Centre Wavelength |
λc |
1304.5 |
- |
1317.5 |
nm |
- |
Side-mode suppression ratio |
SMSR |
30 |
- |
- |
dB |
- |
Average launch power |
Pout |
-0.2 |
- |
6.6 |
dBm |
- |
Optical Modulation Amplitude(OMA outer) |
OMA |
2.8 |
- |
6.8 |
dBm |
- |
Transmitter and dispersion eye closure(TDEC) |
TDEC |
- |
- |
3.4 |
dB |
|
Extinction Ratio |
ER |
3.5 |
- |
- |
dB |
- |
Average launch power of OFF transmitter |
- |
- |
-30 |
dB |
- |
|
Receiver |
||||||
Centre Wavelength |
λc |
1304.5 |
- |
1317.5 |
nm |
- |
Receiver Sensitivity in OMA outer |
RXsen |
- |
- |
-7.6 |
dBm |
1 |
Average receive power |
Pin |
-10 |
- |
6.6 |
dBm |
- |
Receiver Reflectance |
- |
- |
-26 |
dB |
- |
|
LOS Assert |
- |
-13 |
- |
dBm |
- |
|
LOS De-Assert – OMA |
- |
-11 |
- |
dBm |
- |
|
LOS Hysteresis |
0.5 |
- |
- |
dB |
- |
Note:Measured with conformance test signal at TP3 for BER = 2.4E-4 Pre-FECs
Mechanical Dimensions
Ordering Information
Part Number |
Product Description |
FTQ2-HG-LR1 |
QSFP28 LR1-20, 106.25Gb/s, 20km, EML+PIN, SMF, Dual LC,0 ~ +70℃ |
FTQ2-HG-LR1I |
QSFP28 LR1-20, 106.25Gb/s, 20km, EML+PIN, SMF, Dual LC,-40 ~ +85℃ |
北亿纤通 | F-tone Networks
企业邮箱: 该邮件地址已受到反垃圾邮件插件保护。要显示它需要在浏览器中启用 JavaScript。
企业手机:19081343401
企业电话:028-85255257
企业传真:028-85977702
注:本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.