Product Features
- Hot pluggable QSFP28 MSA form factor
 - Up to 80km reach for G.652 SMF with transport white box
 - Single +3.3V power supply
 - Temperature Range 0 to 70°C
 - Transmitter: Cooled EML 2*27.5Gbaud/s DWDM TOSA
 - Receiver: 2*27.5Gbaud/s Pin-PD ROSA
 - 4*25G CAUI4 electrical interface
 - Integrated SFEC with high coding gain
 - PAM4 modulation format on 100GHz ITU DWDM wavelength grid compatible
 - Dual CS adaptor
 - Compatible with RoHS6
 
Applications
- 100G Ethernet Metro-Access over DWDM
 - P to P Access Network
 
ABSOLUTE MAXIMUM RATINGS
Table 2. ABSOLUTE MAXIMUM RATINGS
| 
 Parameter  | 
 Symbol  | 
 Unit  | 
 Min  | 
 Max  | 
| 
 Storage Temperature Range  | 
 Ts  | 
 oC  | 
 -40  | 
 +85  | 
| 
 Relative Humidity  | 
 RH  | 
 %  | 
 5  | 
 85  | 
| 
 Power Supply Voltage  | 
 Vcc  | 
 V  | 
 -0.5  | 
 +3.6  | 
| 
 Operating Case Temperature Range  | 
 Tc  | 
 oC  | 
 0  | 
 +70  | 
| 
 Receiver Damage Threshold Per Lane  | 
 Pdag  | 
 dBm  | 
 +5.2  | 
SPECIFICATION
Recommended Operating Conditions
| 
 Parameter  | 
 Units  | 
 MIN.  | 
 TYP.  | 
 MAX.  | 
 Notes  | 
| 
 Recommended Operating Conditions  | 
|||||
| 
 Operating Case Temperature  | 
 °C  | 
 0  | 
 +70  | 
||
| 
 Power Supply Voltage  | 
 V  | 
 3.135  | 
 3.3  | 
 3.465  | 
|
| 
 Control Input Voltage High  | 
 V  | 
 2  | 
 Vcc+0.3  | 
||
| 
 Control Input Voltage Low  | 
 V  | 
 -0.3  | 
 0.8  | 
||
| 
 Rx Diff Data Output Load  | 
 Ω  | 
 100  | 
|||
| 
 Power Dissipation  | 
 W  | 
 5  | 
 Tc = 70 °C, Vcc = 3.465V, End of Life  | 
||
Transceiver Electrical Specification (TP1)
Table 3. Transceiver Electrical Specification (TP1)
| 
 Parameter  | 
 Comment  | 
 Min  | 
 Typ  | 
 Max  | 
 Unit  | 
| 
 Signaling Rate, each lane  | 
 Typ -100 ppm  | 
 25.7813  | 
 Typ +100 ppm  | 
 Gb/s  | 
|
| 
 DC Common Mode Output Voltage  | 
 -350  | 
 ---  | 
 2850  | 
 mV  | 
|
| 
 Differential Return Loss  | 
 See template1  | 
 ---  | 
 ---  | 
 ---  | 
 dB  | 
| 
 Common to Differential Mode Conversion Return Loss  | 
 See template2  | 
 ---  | 
 ---  | 
 ---  | 
 dB  | 
| 
 Differential Termination Mismatch  | 
 At 1 MHz  | 
 ---  | 
 ---  | 
 10  | 
 %  | 
Receiver Electrical Specification (TP4)
Table 4. Receiver Electrical Specification (TP4)
| 
 Parameter  | 
 Comment  | 
 Min  | 
 Typ  | 
 Max  | 
 Unit  | 
| 
 Signaling Rate, each lane  | 
 Typ - 100 ppm  | 
 25.7813  | 
 Typ + 100 ppm  | 
 Gb/s  | 
|
| 
 Common-Mode AC Output Voltage (RMS)  | 
 ---  | 
 ---  | 
 17.5  | 
 mV  | 
|
| 
 Differential pk-pk output voltage swing  | 
 ---  | 
 ---  | 
 900  | 
 mVpp  | 
|
| 
 Eye Width  | 
 EW15 at 10-15 probability; PRBS 29-1  | 
 0.57  | 
 ---  | 
 ---  | 
 UI  | 
| 
 Eye Height Differential  | 
 EH15 at 10-15 probability; PRBS 29-1  | 
 228  | 
 ---  | 
 ---  | 
 mV  | 
| 
 Vertical Eye Closure  | 
 ---  | 
 ---  | 
 5.5  | 
 dB  | 
|
| 
 Differential Output Return Loss  | 
 See template1  | 
 ---  | 
 ---  | 
 ---  | 
 dB  | 
| 
 Common to Differential Mode Conversion Return Loss  | 
 See template2  | 
 ---  | 
 ---  | 
 ---  | 
 dB  | 
| 
 Differential Termination Mismatch  | 
 ---  | 
 ---  | 
 10  | 
 %  | 
|
| 
 Transition Time (20% to 80%)  | 
 12  | 
 ---  | 
 ---  | 
 ps  | 
|
| 
 DC Common Mode Voltage3  | 
 -350  | 
 ---  | 
 2850  | 
 mV  | 
Notes:
1. Reference IEEE P802.3bm Annex 83E, Figure 83E-7 for template
2. Reference IEEE P802.3bm Annex 83E, Figure 83E-8 for template
Transmitter Optical Specification (TP2)
Table 5. Transmitter Optical Specification (TP2)
| 
 Parameter  | 
 Units  | 
 MIN.  | 
 TYP.  | 
 MAX.  | 
 Notes  | 
| 
 Optical output power  | 
 dBm  | 
 -1  | 
 +4  | 
||
| 
 Transmitter Rate  | 
 Gbps  | 
 55.04318  | 
 55.04318*2λ  | 
||
| 
 Lane center wavelength spacing  | 
 GHz  | 
 100  | 
|||
| 
 Center wavelength  | 
 nm  | 
 See Wavelength Table  | 
|||
| 
 Extinction ratio  | 
 dB  | 
 6  | 
|||
| 
 Side-mode suppression Ratio  | 
 dB  | 
 30  | 
|||
| 
 RIN OMA  | 
 dB/Hz  | 
 -132  | 
|||
| 
 Optical Return Loss Tolerance  | 
 dB  | 
 20  | 
|||
| 
 Transmitter reflectance  | 
 dB  | 
 -12  | 
|||
| 
 Dispersion Tolerance  | 
 ps/nm  | 
 -150  | 
 50  | 
 Residual dispersion (RD) after DCM, and at worst ONSR  | 
|
Receiver Optical Specification(TP3)
Table 6. Receiver Optical Specification(TP3)
| 
 Parameter  | 
 Units  | 
 MIN.  | 
 TYP.  | 
 MAX.  | 
 Notes  | 
|
| 
 Receive Rate  | 
 Gbps  | 
 55.04318  | 
 55.04318*2λ  | 
|||
| 
 Center Wavelength  | 
 nm  | 
 See Wavelength Table  | 
||||
| 
 Receiver reflectance  | 
 dB  | 
 -26  | 
||||
| 
 Receiver Power, each lane  | 
 dBm  | 
 -12.5  | 
 6  | 
|||
| 
 Required OSNR  | 
 dB  | 
 28  | 
 Receiving Power @0~-7dBm  | 
 Pre-FEC BER 4E-3  | 
||
| 
 31  | 
 Receiving Power @-7~-12.5dBm  | 
|||||
| 
 RSSI Accuracy  | 
 dB  | 
 -3  | 
 3  | 
|||
MECHANICAL DRAWINGS
Ordering Information
Table 1. Ordering Information
| 
 Part No  | 
 Specifications  | 
||||||
| 
 Package  | 
 Data rate  | 
 Tx  | 
 Pout  | 
 Rx Sen.  | 
 Top  | 
 Others  | 
|
| 
 FTQ2-DxxHG-PAM4-80  | 
 QSFP28  | 
 103.125Gbps  | 
 Cooled EAM DFB-LD  | 
 -1 ~ +4 dBm  | 
 -12.5 dBm @BER 4E-3  | 
 0~70oC  | 
 DDM  | 
 
北亿纤通 | F-tone Networks
企业邮箱: 该邮件地址已受到反垃圾邮件插件保护。要显示它需要在浏览器中启用 JavaScript。
企业手机:19081343401
企业电话:028-85255257
企业传真:028-85977702
注:本产品有全国产化型号可选
本产品为QSFP28系列光模块,仅展示部分参数,如有需要,请联系我们。
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
