产品描述
● 纯国产零部件
● 传输距离可达40km
● 单电源供电(3.3V)
● 2x5 SFF封装 SC 接口
+86-028-85255257
产品描述
● 纯国产零部件
● 传输距离可达40km
● 单电源供电(3.3V)
● 2x5 SFF封装 SC 接口
Description
The CFP optical transceiver module are a high performance, low power consumption, short reach(1m to 100m) interconnect solution supporting 100G Ethernet and Telecom. It is compliant with the CFP MSA and IEEE
产品描述
● 纯国产零部件
● 传输距离可达40km
● 单电源供电(3.3V)
● 2x5 SFF封装 SC 接口
Description
The 100G CFP to QSFP28 Adapter module is a high performance, hot pluggable, and interconnect solution supporting 100G Ethernet and Telecom. The Adapter converts a CFP MSA interface to
产品描述
● 纯国产零部件
● 传输距离可达20km
● 单电源供电(3.3V)
● 2x5 SFF封装 SC 接口
Description
The F-tone Networks 100GBASE-LR4 CFP module(only receiver) is the CFP optical transceiver which is a hot pluggable form factor designed for high speed optical networking application. The module is designed for
Product Description
F-tone Networks’s FTAF-xxxL2-xxxx series of transceiver modules are the perfect solution for ultra-low speed communication networks.These transceiver modules support data rates up to 10Mbps. The module is fully
Functional Description
F-tone Networks’ FTC1-HG-ER4, 100G CFP ER4 optical transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed,and passed on
产品描述
● 纯国产零部件
● 传输距离可达20km 单电源供电(3.3V)
● 2x5 SFF封装 SC 接口
● 差分CML信号输入与输出 SD输出为LVTTL信号
产品描述
● 纯国产零部件
● 传输距离可达20km 单电源供电(3.3V)
● 2x5 SFF封装 SC 接口
● 差分CML信号输入与输出 SD输出为LVTTL信号
Functional Description
F-tone Networks’ FTC2-HG-ER4, The 100G CFP2 ER4 optical transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed,and
产品简介
CFP/CFP2/CFP4/CFP8/CDFP多种封装可选;传输距离0~80KM可选;850nm/1310/CWDM/DWDM多种波可选;高密度,高速率;符合RoHS-6;MPO/LC光接口可选;支持I2C通信接口和数字诊断功能;
Description
The F-tone Networks CFP4 100GEBASE-LR4 optical transceiver is a hot pluggable 100Gbps small-form-factor transceiver module. It is designed for use in 100 Gigabit Ethernet links and 4x28G OTN client interfaces over
Description
The 400G CFP2-DCO coherent optical module uses a 104-pin CFP2-MSA electrical connector for connecting the host card. Figure1-1 shows the picture of this module.The optical module consists of three functional parts:
Description
The F-tone Networks 100GBASE-LR4 CFP module is the CFP optical transceiver which is a hot pluggable form factor designed for high speed optical networking application. The module is designed for 100Gigabit Ethernet
General
The 10 0G / 20 0G coherent optical module uses a 10 4 - pin CFP2 -MSA electrical connector for connecting the host card.Figure 1-1shows the picture of this module.The optical module consists of three functional parts: TX
Description
The F-tone Networks CFP2 100GEBASE-ER4 optical transceiver is a hot pluggable 100Gbps small-form-factor transceiver module. It is designed for use in 100 Gigabit Ethernet links and 4x28G OTN client interfaces
The FTC2-HG-DCO module uses a 104-pin CFP2 MSA connector for all electrical interfaces with the host card, whereas the optical interfaces on the line side are provided through the optical receptacles on the CFP2.
Description
The F-tone Networks 100G CFP DCO module is the CFP optical transponder which is a hot pluggable form factor designed for high speed optical networking application. The module is designed for 100Gigabit Ethernet and
四川天府新区数字经济产业园5-A栋、5-B栋。
电话: 028-85255257 手机: 19081343401 Mail: support@f-tone.com
sales@f-tone.com support@f-tone.com
24X7