Description
The F-tone Networks 100G LR1 SFP56-DD optical transceiver, 100G SFP56-DD LR1 (SFP56-DD-LR) is designed for using in 100-Gigabit Ethernet links up to 10km over Single-Mode Fiber (SMF). It is compliant with the SFP56-DD MSA,IEEE802.3CU,100G Lambda 100G LR1 and CAUI-4(no FEC)1. Digital diagnostics functions are available via the I2C interface, as specified by the SFP56-DD MSA.
The module incorporates 1 channel optical signal, on 1311nm center wavelength, operating at 100Gbps data rate. This module can convert 2 channels of 53Gbps (PAM4) electrical input data to 1 channel of 106Gbps (PAM4) optical signal, and also can convert 1 channel of 106Gbps (PAM4) optical signal to 2 channels of 53Gbps (PAM) electrical output data. The optical interface uses a Duplex LC connector. The high performance cooled EML transmitter and high sensitivity PIN receiver provide superior performance for 100Gigabit Ethernet applications up to 10km links.
Features
- Compliantto 100G Lambda MSA 100G LR1-10
- Full-duplex transceivermodule
- 25Gb/s(PAM4) optical interface
- 125Gb/s(PAM4) electrical interface
- 1025Gbps PAM4 based on a cooledEML TOSA transmitter
- 1025Gbps PAM4 PINReceiver
- 5W maximum power dissipation
- Hot-pluggable SFP56-DDform factor
- Maximum link length of 10km on G.652 SMF with KP-FEC
- Duplex LC receptacles
- Built-in digital diagnostic functions
- Operating case temperature range: 0 to 70°C
- Single 3.3V power supply
- RoHScompliant(lead free)
Applications
- 100G Lambda 100G LR1-10
- 3CU
Absolute Maximum Ratings
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
Supply Voltage |
Vcc |
-0.3 |
3.6 |
V |
|
Input Voltage |
Vin |
-0.3 |
Vcc+0.3 |
V |
|
Storage Temperature |
Ts |
-20 |
85 |
ºC |
|
Case Operating Temperature |
Tc |
0 |
70 |
ºC |
|
Humidity (non-condensing) |
Rh |
5 |
85 |
% |
Recommended Operating Conditions
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Supply Voltage |
Vcc |
3.13 |
3.3 |
3.47 |
V |
|
Operating Case temperature |
Tc |
0 |
- |
70 |
ºC |
|
Data Rate Per Lane |
fd |
- |
106.25 |
- |
Gb/s |
|
Humidity |
Rh |
5 |
- |
85 |
% |
|
Power Dissipation |
Pm |
- |
3 |
3.5 |
W |
|
Link Distance with G.652 |
D |
- |
- |
10 |
km |
Electrical Specifications
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Differential Input Impedance |
Zin |
90 |
100 |
110 |
ohm |
|
Differential Output Impedance |
Zout |
90 |
100 |
110 |
ohm |
|
Differential Input Voltage Amplitude1 |
ΔVin |
- |
- |
1600 |
mVp-p |
|
Differential Output Voltage Amplitude2 |
ΔVout |
- |
- |
900 |
mVp-p |
Note:
- Differential input voltage amplitude is measured between TxnP and TxnN.
- Differential output voltage amplitude is measured between RxnP and RxnN.
Optical Characteristics
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
|
Transmitter |
||||||
|
Centre Wavelength |
λc |
1304.5 |
- |
1317.5 |
nm |
- |
|
Side-mode suppression ratio |
SMSR |
30 |
- |
- |
dB |
- |
|
Average launch power |
Pout |
-1.4 |
- |
4.5 |
dBm |
- |
|
Transmitter and dispersion eye closure(TDECQ) |
TDECQ |
- |
- |
3.4 |
dB |
|
|
Extinction Ratio |
ER |
3.5 |
- |
- |
dB |
- |
|
Average launch power of OFF transmitter |
- |
- |
-30 |
dB |
- |
|
|
Receiver |
||||||
|
Centre Wavelength |
λc |
1304.5 |
- |
1317.5 |
nm |
- |
|
Receiver Sensitivity in OMA outer |
RXsen |
- |
- |
-6.1 |
dBm |
1 |
|
Average receive power |
Pin |
-7.7 |
- |
4.5 |
dBm |
- |
|
Receiver Reflectance |
- |
- |
-26 |
dB |
- |
|
|
LOS Assert |
- |
-13 |
- |
dBm |
- |
|
|
LOS De-Assert – OMA |
- |
-11 |
- |
dBm |
- |
|
|
LOS Hysteresis |
0.5 |
- |
- |
dB |
- |
|
Note:Measured with conformance test signal at TP3 for BER = 2.4E-4 Pre-FECs
Mechanical Dimensions
Ordering information
|
Part Number |
Product Description |
|
SFP56-DD-LR |
SFP56-DD LR1, 106.25Gb/s, 10km, EML+PIN, SMF, Dual LC |
北亿纤通 | F-tone Networks
企业邮箱： 该邮件地址已受到反垃圾邮件插件保护。要显示它需要在浏览器中启用 JavaScript。
企业手机：19081343401
企业电话：028-85255257
企业传真：028-85977702
注：本产品有全国产化型号可选
本产品为SFP-DD系列光模块，仅展示部分参数，如有需要，请联系我们。
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.