Product Description
F-tone Networks’s FTCS-1312-20Dxx-GC Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector.The module data link up to 10KM in 9/125um single mode fiber.
The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.

Product Features
● Up to 1.25Gb/s data links
● 1310nm FP laser transmitter and PIN photo-detector
● Up to 20km on 9/125µm SMF
● Hot-pluggable SFP footprint
● Duplex LC/UPC type pluggable optical interface
● Low power dissipation
● Metal enclosure, for lower EMI
● RoHS compliant and lead-free
● Single +3.3V power supply
● Support Digital Diagnostic Monitoring interface
● Compliant with SFF-8472
● Meet ESD requirements, resist 8KV direct contact voltage
● Case operating temperature
● Commercial: 0°C to +70°C
      Extended: -10°C to +80°C
      Industrial: -40°C to +85°C

Applications
● Switch to Switch Interface
● Gigabit Ethernet
● 1xFiber channel Application
● Switched Backplane Applications
● Router/Server Interface
● Other Optical Links

Absolute Maximum Ratings 

Recommended Operating Conditions

Specification of Transmitter

Notes:
1.Measure at 2^7-1 NRZ PRBS pattern
2.Transmitter eye mask definition

Specification of Receiver

Notes:
1.Measured with Light source 1310nm, ER=9dB; BER =<10^-12 @PRBS=2^7-1 NRZ
2.When LOS de-asserted, the RX data+/- output is High-level (fixed)

Electrical Interface Characteristics

Mechanical Specifications (Unit: mm)

Part Number Ordering information

注：“GC”为全国产。