Features
● 1310nm DFB transmitter, PIN photo-detector
● 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
● Operating case temperature: 0 to 70 °C or-40 to 85 °C
● ll-metal housing for superior EMI performance
● Low power consumption
● Advanced firmware allow customer system encryption information to be stored in transceiver
● Cost effective SFP+ solution, enables higher port densities and greater bandwidth
● RoHS compliant

Applications
● High-speed storage area networks
● Computer cluster cross-connect
● Custom high-speed data pipes

Absolute Maximum Ratings
These values  represent  the  damage  threshold of the  module.    Stress  in  excess  of  any  of  the  individual Absolute  Maximum  Ratings  can  cause  immediate  catastrophic  damage to  the  module  even  if  all  other parameters are within Recommended Operating Conditions.

OPTICAL CHARACTERISTICS
The  following  optical  characteristics  are  defined  over  the  Recommended  Operating  Environment  unless otherwise specified.

Notes:
1.    Average optical power shall be measured using the methods specified in TIA/EIA-455-95.
2.    Receiver sensitivity is informative. Stressed receiver sensitivity shall be measured with conformance test signal for BER = 1x 10-12 .
3.    Vertical eye closure penalty and stressed eye jitter are the test conditions for measuring stressed receiver sensitivity. They are not the required characteristic of the receiver.
4.    Power budget is defined as the different between the Rx sensitivity and the Tx output power of the interface.
5.    Path penalty is intended as the power penalty of the interface between back-to-back and the maximum applied dispersion.

 ELECTRICAL CHARACTERISTICS
The following electrical characteristics are defined over the  Recommended  Operating  Environment  unless otherwise specified.

Order Information