Description
The F-tone Networks FTQD-4H-DR4xx is a transceiver module designed for 2km optical communication applications, and it is compliant to QSFP-DD MSA, IEEE 802.3bs protocol and 400GAUI-8 standards. The 425 Gigabit signal is carried over four parallel lanes by one wavelength per lane. This module can convert 8-channel 53.125 Gbit/s electrical data to 4 parallel channels of optical signals, each supporting106.25 Gbit/s data transmission. Reversely, it can convert 4-channel 106.25 Gbit/s optical signals to 8-channel electrical output data on the receiver side. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.
Features
● QSFP-DD MSA rev 5.1 and CMIS rev4p0 compliant
● Compliant to 802.3bs 400GBASE-DR4
● 8x53.125Gbit/s PAM4 electrical interface(400GAUI-8)
● 4x106.25Gbps(53.125GBd PAM4)Optics architecture
● Power consumption <10W
● Maximum link length of 2km G.652 SMF with KP-FEC
● MPO receptacles
● Built-in digital diagnostic functions
● 3.3V power supply voltage
● RoHS compliant(lead free)
● Case operating temperature
Commercial: 0 ~ +70℃
Industrial: -40 ~ +85℃
Applications
● IEEE 802.3bs 400GBASE-DR4
● Data center network
Absolute Maximum Ratings
Parameter |
Symbol |
Min |
Max |
Unit |
Supply Voltage |
Vcc |
-0.3 |
3.6 |
V |
Input Voltage |
Vin |
-0.3 |
Vcc+0.3 |
V |
Storage Temperature |
Tst |
-20 |
85 |
ºC |
Case Operating Temperature |
Top |
0 |
70 |
ºC |
Humidity(non-condensing) |
Rh |
5 |
95 |
% |
Recommended Operating Conditions
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Supply Voltage |
Vcc |
3.13 |
3.3 |
3.47 |
V |
Operating Case temperature |
Tca |
0 |
70 |
ºC |
|
Data Rate Per Lane |
fd |
106.25 |
Gbit/s |
||
Humidity |
Rh |
5 |
85 |
% |
|
Power Dissipation |
Pm |
10 |
W |
Electrical Specifications
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Differential input impedance |
Zin |
90 |
100 |
110 |
ohm |
Differential Output impedance |
Zout |
90 |
100 |
110 |
ohm |
Differential input voltage amplitude |
ΔVin |
900 |
mVp-p |
||
Differential output voltage amplitude |
ΔVout |
900 |
mVp-p |
||
Skew |
Sw |
300 |
ps |
||
Bit Error Rate |
BER |
2.4E-4 |
- |
||
Near-end Eye Width at 10^-6 probability(EW6) |
0.265 |
UI |
|||
Near-end Eye Height at 10^-6 probability(EH6) |
70 |
mV |
|||
Far-end Eye Width at 10^-6 probability(EW6) |
0.20 |
UI |
|||
Far-end Eye Height at 10^-6 probability(EH6) |
30 |
mV |
|||
Near-end Eye Linearity |
0.85 |
- |
Note:
- BER=2.4E-4; 该邮件地址已受到反垃圾邮件插件保护。要显示它需要在浏览器中启用 JavaScript。. Pre-FEC
- Differential input voltage amplitude is measured between TxnP and TxnN.
- Differential output voltage amplitude is measured between RxnP and RxnN.
Optical Characteristics
Table 3 - Optical Characteristics
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
Transmitter |
||||||
Centre Wavelength |
λc |
1304.5 |
1317.5 |
nm |
- |
|
Side-mode suppression ratio |
SMSR |
30 |
- |
-- |
dB |
- |
Average launch power, each lane |
Pout |
-2.9 |
- |
4.0 |
dBm |
- |
Optical Modulation Amplitude(OMA outer), each lane |
OMA |
-0.8 |
- |
4.2 |
dBm |
- |
Transmitter and dispersion eye closure(TDEC),each lane |
TDEC |
3.4 |
dB |
|||
Extinction Ratio |
ER |
3.5 |
- |
- |
dB |
- |
Average launch power of OFF transmitter, each lane |
-15 |
dB |
- |
|||
Receiver |
||||||
Centre Wavelength |
λc |
1304.5 |
1317.5 |
nm |
- |
|
Receiver Sensitivity in OMA outer |
RXsen |
|
-4.4 |
dBm |
1 |
|
Average power at receiver , each lane input, each lane |
Pin |
-5.9 |
4 |
dBm |
- |
|
Receiver Reflectance |
-26 |
dB |
- |
|||
LOS Assert |
-15 |
dBm |
- |
|||
LOS De-Assert – OMA |
-8.4 |
dBm |
- |
|||
LOS Hysteresis |
0.5 |
dB |
- |
Note:Measured with conformance test signal at TP3 for BER = 2.4E-4 Pre-FEC
Mechanical Dimensions
Ordering information
Part Number |
Product Description |
FTQD-4H-DR4 |
QSFP DD, 400GBASE-DR4, 2km on Single mode Fiber (SMF),with DSP Power consumption <10W, MPO-12 connector,0~+70℃ |
FTQD-4H-DR4I |
QSFP DD, 400GBASE-DR4, 2km on Single mode Fiber (SMF),with DSP Power consumption <10W, MPO-12 connector,-40~+85℃ |
北亿纤通 | F-tone Networks
企业邮箱: 该邮件地址已受到反垃圾邮件插件保护。要显示它需要在浏览器中启用 JavaScript。
企业手机:19081343401
企业电话:028-85255257
企业传真:028-85977702
注:本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.